Clear Modem M Series Uživatelský manuál stáhnout pdf

CLEAR Modem – Series M Firmware Instructions

Verify Software Version

1. Connect to Device Home Page by typing http://192.168.15.1/

into the web browser. The default

password is: CLEAR123

2. After logging on at the main page, the “Control Panel” screen will display Software information.

3. Record the software version

Updating Software Version

1. Go to http://www.clear.com/support/download

and navigate through list of products to select

the correct device. Verify if device has an recommended software installed. If a “Firmware

Update” link is not present under the Downloads, no software upgrade is required. If present

follow step 2.

2. Compare the software version on device and the clear web page, if different then download the

new software by selecting Firmware Update and store to a location on the computer.

3. Connect to Device Home Page by typing http://192.168.15.1

into the web browser

4. Enter the default password “CLEAR123” to gain Administrative rights access

5. Access the software/firmware update screen by switching to Control Panel

6. Browse the path to the file where it is stored on the computer

7. Click Upgrade

8. Once upgrade is complete, the device will automatically reboot

Software version

1 2 3

Strany 1

CLEAR Modem – Series M Firmware Instructions Verify Software Version 1. Connect to Device Home Page by typing http://192.168.15.1/ into the web brow

9. Verify the upgrade is successful by looking at the software version on the Home page 10. Verify that the device can connect to CLEAR 4G network th

Step 7: Click Upgrade to start upgrade process.

Žádné komentáře

Clear Modem M Series Uživatelský manuál